[email protected]
13/1, om sakthi nagar, Pugalur(S.F) post, Karur. 639113

LEAK REPAIR KIT

WRAP SEAL QUICK REPAIR KIT FOR PIPE LEAKS

single-img-10

Features

  • Repairs leak in 30 minutes
  • Applicable to pipes up to 18″ (457 mm) diameter
  • Applicable on any metal or non-metal pipes
  • Repairs T-joint, elbow joint, valve thread, valve body
  • Withstand pressure up to 400 psi (28 kg/cm2)
  • Withstand temperature up to 200 °C (392 °F)
  • Safe for drinking water and resistant to most chemicals
  • Reinforce and strengthen pipe after repair
  • Permanent repair and extend service life of pipes

APPLICABLE MATERIAL:

  • Steel
  • Copper
  • Aluminium
  • Galvanized steel
  • PVC
  • CPVC
  • Stainless steel
  • Polyethylene
  • Polypropylene
  • Cast-iron
  • Concrete
  • FRP/GRE

CHEMICAL RESISTANCE:

  • Oil
  • Water (drinking water, wastewater, steam)
  • Solvents (acetone, toluene, MEK, ethyl alcohol)
  • Mild acids (hydrochloric acid, sulfuric acid) and alkalis
  • Chemical (ethylene glycol, xylenes, ammonia)
  • Hydrocarbons
  • Bases
  • Slurries
  • Fuels (petroleum, diesels, gasoline)
  • Gases (LNG, LPG)
  • Organic salts

WORKING TIME (FIBERGLASS TAPE):

1 minute at 30 °C (86 °F)

CURING TIME:

  • 30 minutes at 30 °C (86 °F)
  • Heat may be applied to decrease curing time
  • Unopened foil pouch may be immerse in cold water prior to repair to add working and curing time.

APPLICATION:

  • Pipe repairs
  • offline repairs
  • sealing joints
  • hazardous material spill control
  • reinforce thinning walls
  • Abrasion protection
  • Structural reinforcement
  • Repairs in hard to reach areas
  • Underwater repairs

OPERATING TEMPERATURE:

  • Continuous – From -29 °C (-20 °F) up to 200 °C (392 °F)
  • Intermittent – From 200 °C (392 °F) up to 320 °C (570 °F)

OPERATING PRESSURE:

  • Recommended for pressure up to 400 psi (28 kg/cm2)
  • (Results vary depending on pipe size, type of pipe, hole size, pipe content and method of application)

APPLICABLE INDUSTRIES:

appli 1 - LEAK REPAIR PRODUCTS (EN)Building & amp; Facilities
appli 2 - LEAK REPAIR PRODUCTS (EN)Electronics
appli 3 - LEAK REPAIR PRODUCTS (EN)Industrial Processing
appli 4 - LEAK REPAIR PRODUCTS (EN)Irrigation
appli 5 - LEAK REPAIR PRODUCTS (EN)Oil & amp; Gas
appli 6 - LEAK REPAIR PRODUCTS (EN)Chemical
appli 7 - LEAK REPAIR PRODUCTS (EN)Manufacturing Plants
appli 8 - LEAK REPAIR PRODUCTS (EN)Marine
appli 9 - LEAK REPAIR PRODUCTS (EN)Military
appli 10 - LEAK REPAIR PRODUCTS (EN)Offshore
appli 11 - LEAK REPAIR PRODUCTS (EN)Food Processing
appli 12 - LEAK REPAIR PRODUCTS (EN)Petrochemical
appli 13 - LEAK REPAIR PRODUCTS (EN)Pharmaceutical
appli 14 - LEAK REPAIR PRODUCTS (EN)Power Generation
appli 15 - LEAK REPAIR PRODUCTS (EN)Pulp & amp; Paper
appli 16 - LEAK REPAIR PRODUCTS (EN)Wastewater
appli 17 - LEAK REPAIR PRODUCTS (EN)Water Distribution

 

TECHNICAL DATA:

Pressure tested : 1/2″ (15 mm) steel pipe with 1/8″ (3 mm) hole when repaired with Wrap Seal withstands 4000 psi (281 kg/cm2)
1/2″ (15 mm) steel pipe with 1/2″ (13 mm) hole when repaired with Wrap Seal withstands 600 psi (42 kg/cm2)
Tensile strength : 3920 psi (276 kg/cm2)
Bond strength : 230 psi (16 kg/cm2)
Tensile elongation : 1.2 % ± 0.7 %
Compressive strength : 13750 ± 530 psi (967 ± 37 kg/cm2)
Yield strength : 2260 psi (159 kg/cm2)
Cured hardness : 82 Shore D
Pipe size Number of rolls / size required
50 psi (4 kg/cm2) 10 plys 150 psi (11 kg/cm2) 15 plys 400 psi (28 kg/cm2) 20 plys
½” (15mm) 1 A 1 A 1 A
¾” (20mm) 1 A 1 A 1 A
1″ (25mm) 1 A 1 A 2 A
1¼” (32mm) 1 A 2 A 3 A
1½” (40mm) 2 A 2 A 1 B
2″ (50mm) 1 B 1 B 1 B
2½” (65mm) 1 B 1 B 2 C
3″ (80mm) 1 B 2 C 2 C
4″ (100mm) 1 B 2 C 3 C
Pipe size Number of rolls / size required
50 psi (4 kg/cm2) 10 plys 150 psi (11 kg/cm2) 15 plys 400 psi (28 kg/cm2) 20 plys
5″ (125mm) 2 C 2 C 3 C
6″ (150mm) 2 C 2 C 4 C
8″ (200mm) 2 C 3 C 5 C
10″ (250mm) 3 C 4 C 6 C
12″ (300mm) 4 C 5 C 8 C
14″ (350mm) 4 C 6 C 8 C
16″ (400mm) 5 C 7 C 9 C
18″ (450mm) 5 C 8 C 9 C
> 18″ (450mm) Contact SealXpert for recommendations
Roll size A (2″ x 5′) (50mm x 1.2m) A (2″ x 6′) (50mm x 1.8m) B (2″ x 12′) (50mm x 3.6m) B (3″ x 9′) (75mm x 2.7m) C (4″ x 12′) (100mm x 3.6m)

WRAP SEAL OFFLINE LEAK REPAIR PROCEDURE:

1Leak Repair Pro 1 - LEAK REPAIR PRODUCTS (EN)Stop the pipe flow
2Leak Repair Pro 2 - LEAK REPAIR PRODUCTS (EN)Roughen the area to be repaired
3Leak Repair Pro 3 - LEAK REPAIR PRODUCTS (EN)Knead the Seal Stic
4Leak Repair Pro 4 - LEAK REPAIR PRODUCTS (EN)Apply the Seal Stic to fill in holes or crack of the damaged or leak area.
5Leak Repair Pro 5 - LEAK REPAIR PRODUCTS (EN)Immerse the Wrap Seal Fiberglass Tape into water
6Leak Repair Pro 6 - LEAK REPAIR PRODUCTS (EN)Wrap the Wrap Seal Fiberglass Tape around the repair area as tightly and evenly as possible, using the entire roll
7Leak Repair Pro 7 - LEAK REPAIR PRODUCTS (EN)Discard the plastic tube at the end of the roll
8Leak Repair Pro 8 - LEAK REPAIR PRODUCTS (EN)Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap
9Leak Repair Pro 9 - LEAK REPAIR PRODUCTS (EN)Continue to polish the wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance