APPLICATION:
- Applied onto thinning pipe walls for pipeline reinforcement
- Improve hoop strength of pipeline after repair
- Suitable for pipe diameter up to 60″ (1524 mm)
- Applicable for pipeline temperature up to 280 °C (536 °F)
WRAP SEAL PLUS FIBERGLASS REPAIR TAPE
Features
- Remediate, repairs and reinforces
- Durable, strong and permanent
- Restore pipes to original strength
TECHNICAL DATA:
| Tensile modulus | : | 3.8 x 106 psi (267166 kg/cm2) |
| Tensile strength | : | 65000 psi (4570 kg/cm2) |
| Flexural modulus | : | 3.6 x 106 psi (253105 kg/cm2) |
| Flexural strength | : | 53100 psi (3733 kg/cm2) |
| Compressive strength | : | 28500 psi (2004 kg/cm2) |
| Dielectric strength | : | 20000 Volts |
| Hardness | : | 85 Shore D |
WRAP SEAL PLUS CORROSION REPAIR PROCEDURE:
1
Corroded pipe surface
Corroded pipe surface
2
Roughen the area to be repaired
Roughen the area to be repaired
3
Mix and stir Wrap Seal PLUS Resin and Activator for at least 1 minute until well mixed
Mix and stir Wrap Seal PLUS Resin and Activator for at least 1 minute until well mixed
4
Apply two coats of activated resin evenly over the area to be repaired and allow to cure
Apply two coats of activated resin evenly over the area to be repaired and allow to cure
5a
Immerse Wrap Seal PLUS Fiberglass Repair Tape into water
Immerse Wrap Seal PLUS Fiberglass Repair Tape into water
6a
Wrap the fiberglass repair tape as tightly and evenly as possible, with at least 50% overlap over affected pipe length
Wrap the fiberglass repair tape as tightly and evenly as possible, with at least 50% overlap over affected pipe length
7a
Discard the plastic tube at the end of the roll
Discard the plastic tube at the end of the roll
8a
Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance
Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance
FLAT SURFACE/TANK
Apply Several layers of wrap Seal PLUS Surface Tissue or Wrap Seal Plus Chopped
Strand Mat onto the affected area.
Apply Several layers of wrap Seal PLUS Surface Tissue or Wrap Seal Plus Chopped
Strand Mat onto the affected area.