- Excellent fiber distribution
- Good tear strength
- Good tensile strength
- Excellent weather-proofing
- Longer service life
- Non-hazardous
- Impose seepage resistance
WRAP SEAL PLUS SURFACE TISSUE
Features
APPLICATION:
- Applied with Wrap Seal PLUS Resin and Activator to provide high tensile strength, impact, abrasion,
and corrosion resistance for large surfaces (storage tanks, vessels, etc.) - Designed to be used as a surfacing tissue to provide a gel-coat/resin reinforcement and a smooth
resin-rich surface to the composite
TECHNICAL DATA:
| Appearance and odour | : | White / Off-white colored solid with odour |
| Glass type | : | C |
| Fiber diameter | : | 12.5μ ± 1 |
| Binder type | : | Styrene-acrylic |
| Thickness | : | 0.01″ (0.25 mm) |
WRAP SEAL PLUS CORROSION REPAIR PROCEDURE:
1
Corroded pipe surface
Corroded pipe surface
2
Roughen the area to be repaired
Roughen the area to be repaired
3
Mix and stir Wrap Seal PLUS Resin and Activator for at least 1 minute until well mixed
Mix and stir Wrap Seal PLUS Resin and Activator for at least 1 minute until well mixed
4
Apply two coats of activated resin evenly over the area to be repaired and allow to cure
Apply two coats of activated resin evenly over the area to be repaired and allow to cure
5a
Immerse Wrap Seal PLUS Fiberglass Repair Tape into water
Immerse Wrap Seal PLUS Fiberglass Repair Tape into water
6a
Wrap the fiberglass repair tape as tightly and evenly as possible, with at least 50% overlap over affected pipe length
Wrap the fiberglass repair tape as tightly and evenly as possible, with at least 50% overlap over affected pipe length
7a
Discard the plastic tube at the end of the roll
Discard the plastic tube at the end of the roll
8a
Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance
Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance
FLAT SURFACE/TANK
Apply Several layers of wrap Seal PLUS Surface Tissue or Wrap Seal Plus Chopped
Strand Mat onto the affected area.
Apply Several layers of wrap Seal PLUS Surface Tissue or Wrap Seal Plus Chopped
Strand Mat onto the affected area.